Rectangular steel tube comes in different sizes, specifications and wall thicknesses. Its uniformity makes it predictable to use and visually appealing. It has a high weight-to-strength ratio. It’s easy to bend, and because square steel tubing is inexpensive, it’s cost-effective- even for large projects.
We are manufacturing and exporting Rectangular Hollow Sections, Rectangular Hollow Steel Sections and Rectangular Hollow Section Tubes as per customer's requirement with anti rust oil coating from inside & outside of the tubes to ensure safe delivery to end customers.
Specialising in Steel, Cut to Length, Round, Square, Hollow, Rectangular, Rectangular Hollow Sections, RHS
Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.
Note: Pre-galvanized square / rectangular hollow section with OD 19mm-70mm and thickness 1mm-2.3mm are also available.
Application:
Furniture industries & domestic applications, bus body, fencing etc. Sizes other than mentioned above can also be produced upon specific requirements.
We are manufacturing and exporting Rectangular Hollow Sections, Rectangular Hollow Steel Sections and Rectangular Hollow Section Tubes as per customer's requirement with anti rust oil coating from inside & outside of the tubes to ensure safe delivery to end customers.
Specialising in Steel, Cut to Length, Round, Square, Hollow, Rectangular, Rectangular Hollow Sections, RHS
- Steel Grade: Q235, Q345, S235JR, S275JR, SS4007
- Surface Finish: hot dipped galvanized, electro galvanized, black
- SHS (Square Hollow Section) Size range Table 3.
Steel tube is easily recyclable. Many projects take advantage of square steel tubing, including all types of buildings, highway guardrails and signage, support columns, trusses, bridges, heavy equipment, storage systems, and exercise equipment.
A wide range of dimensions, when combined with the appropriate steel grade, ensure that the functionality and cost-efficiency of your structure can be optimised.
Tolerances:
A wide range of dimensions, when combined with the appropriate steel grade, ensure that the functionality and cost-efficiency of your structure can be optimised.
Tolerances:
| Length | +/- 50 MM |
| Wall Thickness | +/- 12.5% |
| Weight | +/- 8% |
Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.
Note: Pre-galvanized square / rectangular hollow section with OD 19mm-70mm and thickness 1mm-2.3mm are also available.
Application:
Furniture industries & domestic applications, bus body, fencing etc. Sizes other than mentioned above can also be produced upon specific requirements.
